2401AUFd McKenzie 4-Drawer Desk
Assembly Instructions
2401AUFd — Page 4 — 03/17
Tools Required: 9/16" or Adjustable Wrench
1.
Remove the drawers from the Case Assembly (Ac). To do that, pull up on the left Drawer
Release Lever while pushing down on the right Drawer Release Lever and pull out the drawer.
See Figure 1a. Note where each drawer came from to make sure you place them back into their
correct positions.
2.
Turn the Case Assembly (Ac) upside-down on a clean protected surface. (Be careful not to
engage the touch/spring latch on the pull-out writing surfaces.) Place a Leg (C) at each corner
making sure the drilled portions of the legs face the corner blocks. Insert eight 3/8" x 2-1/2" Hex
Bolts (ZF) with eight 5/16" Flat Washers (ZE) through the corner blocks and into the Legs (C).
Fasten securely. See Figures 2 and 2a.
Fig. 2a
ZE
ZF
x 8
x 8
ZE
Fig. 2
ZE
ZF
ZF
D
D
Ac
Fig. 1
Drawer Release Lever
Fig. 1a