2079GAC 2079CAF 64"W McKenzie 2-Drawer Media Console
Assembly Instructions
2079GAC_2079CAF — Page 4 — 03/17
Tools Required: Phillips Screwdriver, Pencil.
1.
Place the console at its final destination. Rotate the Small Adjustable Glides (ZH) found at the
corners of the unit and (ZG) at the bottom of the Center Foot until the unit is level. See Figure 1.
2.
To insert your media components and access wires more easily, you may want to remove the
Removable Backs (D). To do so, unlock the Turn Buttons (ZC) as shown in Figures 2 and 2b.
Slide the Backs away and place them off to the side. After installing the components, slide the
Backs (D) behind the Drawer Stops (Y) and lock the Turn Buttons. See Figures 2, 2a, 2b, 2c.
Y
ZC
Locked
Fig. 2
Fig. 2b
Fig. 2a
D
Y
ZC
Unlocked
ZC
Fig. 2c
D
Fig. 1
ZH
ZH
ZG
