2.
To move the Adjustable Shelves (B & C), remove the #6 x 1/2" Undercut Screws (O) and the Shelves
(B & C). Reposition the Shelf Brackets (N) to the desired positions, replace the shelf and insert
the screws. See Figures 2 and 2a.
Place the console at your desired location. Rotate the Adjustable Glides found at the front
corners of the unit and at the bottoms of the Assembled Foot (R) until the unit is level. See Figure 2.
Doors removed for purposes of
this illustration.
Fig. 2
Fig. 2a
O
N
B
C
C
TOOL REQUIRED:
Phillips Screwdriver
2072AEGAC_AEGSP_AECAF_2073AEGAC_AEGSP_AECAF — Page 3 — 02/10
R
3.
Locate two studs in the wall behind the unit. Attach one Clip (T1) to one wall stud with two #8 x 2"
Black Screws (T3). See Figure 3a. Attach a second clip the the unit with #8 x 1" Pan Head Screws
(T4). See Figure 3b. Connect the two clips with the Nylon Restraint Strap (T2).
Pull the Nylon
Restraint Strap (T2) tight so there is no slack.
See Figures 3a and 3b. Repeat this step to attach
the second tipping restraint. If you cannot locate two studs, purchase the proper wall attachment
hardware for your type of wall and secure the unit.
Tipping Restraint (TR)
Fig. 3a
Fig. 3c
Fig. 3d
T1
ZC
T3
ZD
T1
T2
Fig. 3b
T4
T1
Glazed Antique Cherry finish (AEGAC) &
Glazed Spice finish (AEGSP) & Caffè finish (AECAF)
49" Wide & 54" Wide McKenzie Bookcase Console
— Assembly Instructions
Tighten the Nylon Restrain
Strap (T2) so there is no slack.
Pull tight.
