2051DUET Addison Cal-King Panel Bed
Assembly Instructions
This assembly requires two people.
2051DUET — Page 6 — 09/16
5.
Attach an Assembled Foot (C) to four of the five Slats (D) as shown in Figure 5.
6.
Move the bed assembly to its final position. Position the Slats (D) on the bottom edges of the
rails and place the slat without the Assembled Foot nearest to the Footboard. Attach with
#8 x 1-1/4" Black Screws (H). See Figure 6.
7.
Adjust the Adjustable Glides with Hex Nut (E) on the Assembled Feet (C) so the Glides just
touch the floor, making sure the Assembled Feet bear weight.
E
Fig. 7
C
H
x 10
Fig. 6
H
Slat without
an
Assembled
Foot.
D
D
Fig. 5
X 4
C