1863GBCHa Cascade Cal-King Storage Bed
Assembly Instructions
This assembly requires two people.
1863GBCHa
— Page 7 — 08/13
6.
Open the drawers. Face the Footboard and stand in between the first and second braces.
Place a Trestle with T-Nuts (C) on the outside surfaces of the first upper left and right braces so
the T-Nuts (R) sit near the top. See Figure 6a. Line up the upper edges of the trestle and braces
until they are nearly flush. Insert two 1/4" x 1-3/4" Hex Bolts (J) and Washers (K) and tighten.
Repeat for the second upper brace.
Place a Trestle with T-Nuts (C) on the outside surface of the second lower brace so the T-Nuts
(R) sit near the bottom. Line up the bottom edges of the trestle and braces so they are nearly
flush. Insert two 1/4" x 1-3/4" Hex Bolts (J) and Washers (K) and tighten.
See Figures 6 and 6a.
Fig. 6
C
First brace
Second
brace
C
J
K
J
K
x 6
x 6
Footboard
Headboard removed for illustration purposes.
Fig. 6a
K
J
Brace