Tools Required: Phillips Screwdriver, Pencil, Rubber Mallet or Padded Hammer
Page 3 — 48W_72-84H-w/Doors_Finished — 3/17
McKenzie Alder Bookcase with Doors
Assembly Instructions
Side adjustment
To move the door towards the side panel, rotate screw '2'
counter-clockwise. To move it away, rotate screw
'2' clockwise.
Depth Adjustment
Loosen screw '1' and adjust door. Re-tighten screw.
Height Adjustment
Loosen screws '3' and adjust door. Re-tighten screw.
2. The door may need to be adjusted so that all the spaces between the doors and unit sides are
equal. To make those adjustments, follow the instructions in Figure 2.
3. Place the bookcase at your desired location. Level the unit using the
Adjustable Glides (I) located on the bottom of the unit. See Figure 1.
Continued on Page 4
If there is a problem with a Hinge (K), do not attempt to remove it. Contact Customer Service first.
1555 Shown
A
D
A
J
I
A
Fig. 1a
B
C
Fig. 1
Fig. 2
1
2
3
3
1.
To move the adjustable shelves:
Determine where you want to place the Adjustable Shelves (A). Remove the #6 x 1/2" Undercut
Screws (C) from the underside of the shelf and take out the Shelf and Shelf Brackets (B). Insert the
Shelf Brackets (flat side down) into the four different holes and insert the shelf. You may secure
them by inserting #6 x 1/2" Undercut Screws (C). See Figure 1a.