1507RGB Stonewood Landscape Mirror
Assembly Instructions
1507RGB — Page 6 — 09/15
7.
Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(F) with four M4 x 41 Machine Screws (K). The upper screws will be inserted into the 3
rd
hole
from the top and the lower screws will be inserted into the 2
nd
hole from the bottom of the Mirror
Supports. See Figure 7 and 7a.
8.
Peel off the backing on the Velvet Pads (L) and apply them to the bottom of the Mirror Assembly
(A). See Figure 8.
L
L
L
Fig. 8
A
K
x 4
K
Dresser
(Back view)
F
K
K
Fig. 7
3
rd
hole from the top
2
nd
hole from the bottom
Fig. 7a