1503GBCHb Cascade Mirror
Assembly Instructions
1503GBCHb
— Page 4 — 05/13
3.
NOTE: The Mirror Wall Bracket (I) angles out at the top. When you hang your Mirror, the bracket
that is attached to the back of the Mirror fits over the angled part of the Mirror Wall Bracket (I).
See Figure 3.
4.
Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(Ha) with four M4 x 41 Machine Screws (P). The upper screws will be inserted into the 3
rd
hole
from the top and the lower screws will be inserted into the 3
rd
hole from the bottom of the Mirror
Supports. See Figure 4 and 4a.
Ab
Wall
Stud
Mirror Wall Bracket (I)
(side view)
Wall
Mirror Wall
Brackets (I)
(back view)
Fig. 3
P
x 4
P
1153 Dresser
(Back view)
Ha
P
P
Fig. 4
3
rd
hole from the top
3
rd
hole from the bottom
Fig. 4a
