1357GACa 1357CAFa McKenzie Full/Queen Headboard
1358GACa 1358CAFa McKenzie King/Cal-King Headboard
Parts List
1357GACa_1357CAFa_1358GACa_1358CAFa — Page 2 — 08/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Aa
Headboard Assembly
1
E
18mm Flat Washer
6
I
#14 x 1-1/4" Pan Head Screw
6
J
1/4" Flat Washer (inserted)
6
K
5/16" x 3" Lag Bolt (inserted)
6
L
#8 x 1-1/4" Pan Head Screw (inserted)
4
1357 shown in the illustrations.
Assembly Instructions
Tools Required: Drill, 1/8" bit, Phillips screwdriver.
IF YOU ARE USING A HOLLYWOOD BED FRAME:
1.
Adjust the Hollywood frame to fit your mattress and box spring.
2.
Place the Headboard (Aa) against the end brackets of the frame and mark the locations for the
screws. Drill pilot holes approximately 1-1/4" deep. (To make sure you don’t drill deeper,
measure 1-1/4" up from the end of the drill bit and wrap a piece of tape around the bit. Stop
drilling when the edge of the tape meets the wood.)
3.
Position the Headboard (Aa) against the frame and attach using six #14 x 1-1/4" Pan Head
Screws (I) and 18mm Flat Washers (E).