1295LSO 1295DAO Prairie City Beveled Mirror
Assembly Instructions
1295LSO_1295DAO — Page 3 — 03/17
Tools Required:
Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected Dressers. To attach the Mirror
to a wall, follow steps 1-3. To attach the Mirror to a Dresser, follow steps 4-6.
1.
Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. Using a tape measure, measure up 35" from that line. Draw another faint line. The top line
is where you will attach the Mirror Wall Bracket (Q). If you like, you may erase the faint bottom
pencil mark. See Figure 1.
2.
Locate two studs in the wall behind the space where you want to hang your Beveled Mirror. Affix
the Mirror Wall Bracket (Q) into the studs with two #8 x 1-3/4" Pan Head Screws (K). If you
cannot locate two studs, purchase the proper wall attachment hardware for your type of wall and
secure the bracket. See Figure 2.
Fig. 1
Wall
35"
Fig. 2
Wall
Q
K
x 1
x 2
Q
K