1191RGBa Stonewood Door Chest
Assembly Instructions
1191RGBa — Page 4 — 12/16
Tool Required: Phillips Screwdriver, Pencil, and optional ½" wrench.
1.
This piece of furniture includes a drawer interlock system allowing only one lower drawer to be
open at a time. This is a safety feature to reduce the risk of tip over. Do not defeat or remove the
drawer interlock system.
2.
Place the unit at its final destination. Rotate the Small Adjustable Glides (ZK) found at the
corners of the unit and the Adjustable Glide with Hex Nut (T) at the bottom of the Assembled
Foot (M) until the unit is level. It is also important the Assembled Foot (M) supports the weight of
the chest. The Adjustable Glide with Hex Nut (T) on the Assembled Foot (M) can be adjusted
using a ½" wrench. See Figure 2.
3.
To move the Adjustable Shelves (C), remove the #6 x 1/2" Undercut Screws (Q) and the
Shelves (C). Reposition the Shelf Brackets (ZL) to the desired positions, replace the shelf and
insert the screws. See Figures 3 and 3a.
C
Fig. 3
Door removed for illustration purposes.
ZL
Q
Fig. 3a
C
Fig. 2
T
M
ZK
ZK