Whittier Wood 1183AUFe Assembly Instructions Manual Download Page 2

Page: 2 / 12

1183AUFe McKenzie 75"W Master Dresser

Parts List

1183AUFe — Page 2 — 04/19

Please identify the parts and check that quantities received match those on this list.

If you need to replace a part, refer to the following letter(s) and part name.

Part

Description

Quantity

Top Assembly (attached)

Case

Lower Small Drawer Box (inserted)

Upper Small Drawer Box (inserted)

Upper Medium Drawer Box (inserted)

Lower Medium Drawer Box (inserted)

Large Drawer Box (inserted)

Lower Small Drawer Face (installed)

Upper Small Drawer Face (installed)

Upper Medium Drawer Face (installed)

Lower Medium Drawer Face (installed)

Large Drawer Face (installed)

Small Tray (inserted)

Large Tray (inserted)

M4 x 10mm Insert Nut (inserted)

1/4" x 20mm Insert Nut (inserted)

Adjustable Glide (installed)

Knob (attached)

#8 x 1-1/2" Machine Screw Tuscan (installed)

Summary of Contents for 1183AUFe













Search results

Summary of Contents for 1183AUFe

Reviews:

Related manuals for 1183AUFe

Brands by name

Popular brands

Whittier Wood 1183AUFe, Assembly Instructions Manual

Search results

Summary of Contents for 1183AUFe

Reviews:

Related manuals for 1183AUFe

Brands by name

Popular brands