1137GSPf; 1137CAFf Pacific 9-Drawer Dresser
Assembly Instructions
1137GSPf_1137CAFf — Page 4 — 11/16
Tool Required: Phillips Screwdriver, Pencil.
1.
There is a secret storage area in the Small Drawer (G). To access this storage, open the top
Large Right drawer (F). Reach in until you find the Hinged Drawer Stop (Vb) that is attached to
the bottom right side of the Small Drawer (G). Pull the Hinged Drawer Stop forward and then
pull the Small Drawer (G) out far enough so you can access the concealed storage space.
To close the drawer, just push it shut. See Figure 1.
2.
This piece of furniture includes two drawer interlock systems, one controlling each vertical bank
of drawers; this allows only one lower drawer in each bank to be open at a time. This safety
feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems.
3.
Place the unit at its final destination. Rotate the Small Adjustable Glides (Y) found at the corners
of the unit and the Adjustable Glide with Hex Nut (ZW) at the bottom of the Assembled Foot
(ZX) until the unit is level. See Figure 3.
Fig. 3
ZX
ZW
Y
Y
Fig. 1
G
Vb
G
F