1134AFGSPa; 1134AFCAFa & 1136AFGSPa; 1136AFCAFa Pacific Chest
Assembly Instructions
1134AFGSPa_1134AFCAFa_1136AFGSPa_1136AFCAFa — Page 3 — 05/12
Tool Required: Phillips Screwdriver
1.
Position the chest at the desired location. Adjustable Glides (U) are attached to the bottoms of
the feet. Rotate the glides until the unit stands level. See Figure 1.
2.
Tipping restraint:
Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 2a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 2b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 2c and 2d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 2a
T1
T3
Pull tight
Fig. 2d
T1
T2
T3T4
Fig. 2c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T4
T1
Fig. 2b
U
Fig. 1
U