1123GACf; 1123CAFf McKenzie Office Chest
Assembly Instructions
1123GACf_1123CAFf — Page 5 — 12/16
4.
If you need to remove your drawers, pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 4 and 4a. Note
where each drawer came from to make sure you place them back into their correct positions.
5.
When removing drawers from furniture featuring the Anti-Tip Drawer Interlock System it is
important that the drawer be installed back in its original location. Numbers and letters are
stamped on the back of the drawers. Stamping sequence starts at the bottom, moves to the top
and designated left or right.
Drawer back stamping example:
1
Fig. 5
2
Fig. 4
Drawer Release Lever
Fig. 4a
