Whittier Wood 1109RGB Assembly Instructions Manual Download Page 7

Page: 7 / 7

1109RGB Stonewood Round End Table (26"D)

Assembly Instructions

1109RGB — Page 7 — 10/17

Turn the table upright and insert the Drawer (D). Rotate the Drawer Stop (F) back to the locked
position. See Figure 9.

10. Place the table at its final destination. To level the table, rotate the Adjustable Glides (O) found

on the bottoms of the legs. See Figure 9.

Fig. 9

Summary of Contents for 1109RGB

Page 3: ...added Hammer 1 Turn the Top Assembly A upside down on a clean protected surface Position the Drawer Stop F so that it is unlocked remove the Drawer D and place it off to the side See Figures1 1a and 1b 2 Place a Leg B in a corner of the Top Assembly A See Figure 2 Fig 2 B A Fig 1 Fig 1a A Locked Position Unlocked Position Fig 1b F D F F ...

Page 4: ...e as a guide secure the Leg B to the Top Assembly A with one 8 x 1 1 4 Pan Head Screw H See Figures 3 and 3a 4 Place a second Leg B in a corner of the Top Assembly A and using the pocket hole as a guide secure the Leg B with one 8 x 1 1 4 Pan Head Screw H See Figure 4 Fig 4 B A H x 1 Fig 3 H x 1 Fig 3a H ...

Page 6: ...the pocket holes as guides secure the Shelf C to the Legs B with four 8 x 1 1 4 Pan Head Screws H See Figures 7 and 7a 8 Using the pocket holes as guides secure the side aprons to the Legs B with four 8 x 1 1 4 Pan Head Screws H See Figures 8 and 8a Fig 8 H x 4 H Fig 8a Fig 7 H x 4 H Fig 7a ...

Page 7: ...e 7 10 17 9 Turn the table upright and insert the Drawer D Rotate the Drawer Stop F back to the locked position See Figure 9 10 Place the table at its final destination To level the table rotate the Adjustable Glides O found on the bottoms of the legs See Figure 9 Fig 9 O O ...