1433AFVCL Shaker Cal-King Bed
Assembly Instructions
Page 3 — 1433AFVCL
TOOLS REQUIRED:
This Assembly Requires Two People
Phillips screwdriver, 7/16" open end or box end wrench and tape measure.
1.
Place both Pedestals (I) approximately 74" apart as shown in Fig.2.
2.
Fig. 2
I
I
74"
Fig. 1
Shipping Straps
S
R
Remove the Long Center Deckboard (R), Short Center Deckboard (S) and the
Trestles (C) that are underneath the Deckboards from the back of the Headboard
as seen in Fig. 1 and place them off to the side.
C
