7142GDRC Northgate Cal-King Storage Bed
Assembly Instructions
7142GDRC — Page 9 — 09/11
7.
Place the bed at its final location.
8.
Position the Bottom Slats (L) on the bottom notched edges of the rails. Adjust the glides on the
bottoms of the Small Assembled Foot (R) so they bear weight. See Figure 8.
9.
The Bottom Deckboards (O) has a notch-cut on the corner to clear the brackets of the
Headboard and a notch-cut centered at the end to clear the Large Foot Assemblies. Slide the
notched corners of the Bottom Deckboards (O) over brackets at the headboard end of the
assembly as shown in Figure 9. There should be a small gap between each deckboard. Secure
with #6x5/8" Philtruss Screws (ZH).
ZH
x 24
O
ZH
Fig. 9
Fig. 8
L
