Whittier Wood Furniture Ellison 2136ASTa Assembly Instructions Manual Download Page 4

Page: 4 / 8

2136ASTa Ellison 50"W Dresser

2137ASTa Ellison 60"W Dresser

Assembly Instructions

2136ASTa_2137ASTa — Page 4 — 05/20

Tools Required: Phillips Screwdriver, Pencil.

Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety

Guide.

1. Remove screws from the plywood supports and side aprons. Recycle or discard. See Figure 1.

2. This piece of furniture includes two drawer interlock systems, one controlling each vertical bank

of drawers; this allows only one lower drawer in each bank to be open at a time. This safety

feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems.

3. Place the unit at its final destination. Use the Leveler Adjustment Key (ZK), found in the Zip bag

taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (ZJ) on the

bottoms of the legs and rotate the Adjustable Glide with Hex Nut (Q) at the bottom of the

Assembled Foot (I) until the unit is level until the unit is level. See Figures 3 and 3a.

Fig. 3

Loose

Tight

Fig. 3a

Fig. 1

Plywood Supports

Summary of Contents for Ellison 2136ASTa








