1248RLN Bryce 70"W Dresser
Assembly Instructions
1248RLN — Page 4 — 10/19
Tools Required: Phillips Screwdriver, Pencil.
1. This piece of furniture includes two drawer interlock systems, one controlling each vertical bank
of drawers; this allows only one lower drawer in each bank to be open at a time. This safety
feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems.
2. Place the dresser at its final destination. Rotate the Small Adjustable Glides (ZH) on the bottoms
of the legs until the unit is level. See Figure 2.
3. If you need to remove your drawers, pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 3 and 3a. Note
where each drawer came from to make sure you place them back into their correct positions.
Fig. 3
Drawer Release Lever
Fig. 3a
Fig. 2
ZH
ZH