background image

1239DUETe Addison 70"W Dresser 

Assembly Instructions

 

1239DUETe — Page 5 — 05/20 

 

3.  This piece of furniture includes two drawer interlock systems, one controlling each vertical bank 

of drawers; this allows only one lower drawer in each bank to be open at a time. This safety 

feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems. 

 

4.  Place the unit at its final destination. Use the Leveler Adjustment Key (YB), found in the Zip bag 

taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (YA) on the 

bottoms of the legs and rotate the Adjustable Glide with Hex Nut (T) at the bottom of the 

Assembled Foot (M) until the unit is level until the unit is level. See Figures 4 and 4a. 

 

5.  If you need to remove your drawers, pull up on the left Drawer Release Lever while pushing 

down on the right Drawer Release Lever and pull out the drawer. See Figures 5 and 5a. Note 

where each drawer came from to make sure you place them back into their correct positions. 

 

Fig. 5 

Drawer Release Lever 

Fig. 5a 

Fig. 4 

YA 

YA 

Loose 

Tight 

Fig. 4a 

YB 

YA 

Summary of Contents for Addison 1239DUETe










Reviews: