2091AFGSPb; 2091AFCAFb 64"W Pacific Sound Bar Console
Assembly Instructions
2091AFGSPb_2091AFCAFb
— Page 5 — 07/13
Tool Required: Phillips Screwdriver
1.
Place the unit at its final destination. Rotate the Small Adjustable Glides (ZB) found at the
corners of the unit and the Adjustable Glide with Hex Nut (YF) at the bottom of the Assembled
Foot (YG) until the unit is level. See Figure 1.
Step two is optional:
Attach the Push Plates (ZY) when the console will be placed in a high-use
area such as a retail sales floor where the Sound Bar Speaker Door (Ga) will be opened and closed
often.
2.
Remove the Speaker Door (Ga) and place it face-up on a clean protected surface. Center a
Push Plate (ZY) over the right Tuscan Magnetic Plate (YI) and attach with two 1/2" Dark Antique
Brads (ZZ). Repeat for the left side. See Figure 2. Attach the Door.
Fig. 1
ZB
ZB
YF
YG
Fig. 2
ZY
ZZ
x 2
x 4
ZZ
ZY
YI
Ga
(back view)
ZZ
ZY
YI
