2.
To move the Adjustable Shelves (B, C), remove the #6 x ½" Undercut Screws (O) and the Shelves
3.
To finish the Large Door Frame (E), you must first remove the glass. Remove the door from its
hinges and lay it face-down on a clean, protected surface. Remove the #6x¾" Brass Flat Head
Screws, the Door Glass Support Stiles (K), Door Glass Support Rails (J) and set aside. Carefully
lift the Large Door Glass (G) and put it safely away. Finish the door frame, stiles and rails and, after
the finish dries, replace the glass and reattach the Door Glass Support Rails (J) and Door Glass Support
Stiles (K) with #6x¾" Brass Flat Head Screws (Q). Rehang the door. See Figures 3, 3a and 3b.
(B, C). Reposition the Shelf Brackets (N) to the desired positions, replace the shelf and reinsert
the screws. See Figures 2 and 2a.
Rotate the Adjustable Glides found at the front corners of the unit and at the bottoms
of the Assembled Foot (R) until the unit is level.
Doors removed for purposes of
this illustration.
Fig. 2
Fig. 2a
O
N
B
C
C
Assembly Instructions
TOOL REQUIRED:
Phillips Screwdriver
2072AUF - 2073AUF — Page 3 — 02/09
Fig. 3
Q
x 10
Fig. 3a
J
J
Q
K
K
R
2072AUF 49"w McKenzie Bookcase Console
2073AUF 54"w McKenzie Bookcase Console
E
G
DO NOT LEAN ON THE GLASS AT ANY TIME.
Fig. 3b
J
J
Q
K
K
