1610AUFb Center Wall Unit &
1611AUFb Center Wall Unit with doors
Assembly Instructions
Page 3—1610_1611_RTF—9/20
Tools Required: Phillips Screwdriver, Pencil, Rubber Mallet or Padded Hammer
Tools Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and
Safety Guide.
1. Determine where you want to place the Adjustable Shelves (B). To support each shelf, tap the
Shelf Brackets (D) into the four holes with the flat side down and insert the shelf. You may
fasten the bracket to the shelf by inserting #6 x 1/2" Undercut Screws (E). Repeat for each shelf.
See Figures 1 and 1a.
2. Place bookcases at its final destination. Use the Leveler Adjustment Key (Ua), found in the Zip
bag taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (U) on the
bottom of the legs until the unit is level. See Figure 2.
3. To adjust the doors, follow the instructions below.
Side adjustment
To move the door towards the side panel, rotate screw
‘2’
counter-clockwise. To move the door away from the
side panel, rotate screw
‘2’
clockwise.
Depth Adjustment
Loosen screw
‘1’
and adjust the door. Re-tighten screw.
Height Adjustment
Loosen screws
‘3’
and adjust the door. Re-tighten
screw.
3
2
1
3
Loose
Tight
Ua
U
U
B
B
B
E
D
Fig. 1a
Fig. 1
Fig. 2
Fig. 3
