1610AUF Center Wall Unit without doors &
1611AUF Center Wall Unit with doors
Assembly Instructions
1610AUF_1611AUF
— Page 3 — 10/13
Tool Required: Phillips Screwdriver, Pencil, Rubber Mallet or Padded Hammer
1.
Determine where you want to place the Adjustable Shelves (B). To support each shelf, tap the
Shelf Brackets (D) into the four holes with the flat side down and insert the shelf. You may
fasten the bracket to the shelf by inserting #6 x 1/2" Undercut Screws (E). Repeat for each shelf.
See Figures 1 and 1a.
2.
Level the unit using the Adjustable Glides (J) located on the bottom of the unit. See Figure 1.
3.
To adjust the doors, follow the instructions below.
Fig. 3
1
Side adjustment 4mm (5/32")
To move the door towards the side
panel, loosen screw
‘1’
and tighten
screw
‘2’
. To move the door away
from the side panel, loosen screw
‘2’
and tighten screw
‘1’
.
Depth Adjustment 4mm (5/32")
Loosen screw
‘2’
(just one turn),
adjust the door to the desired position
and tighten the screw.
Height Adjustment 4mm (5/32")
Loosen screw
‘3’
, adjust the door to
the desired position and tighten
the screw.
3
3
2
Fig. 1
E
D
Fig. 1a
B
B
B
J
