1143DUETb 6-Drawer Addison Chest
Assembly Instructions
1143DUETb — Page 4 — 02/17
Tools Required: Phillips Screwdriver, Pencil.
1.
Remove screws from the plywood supports and side aprons. Recycle or discard. See Figure 1.
2.
This piece of furniture includes a drawer interlock system allowing only one lower drawer to be
open at a time. This is a safety feature to reduce the risk of tip over. Do not defeat or remove the
drawer interlock system.
3.
Place the chest at its final destination. Rotate the Small Adjustable Glides (ZD) on the bottoms
of the legs until the unit is level. See Figure 3.
Fig. 3
ZD
ZD
Fig. 1
Plywood Supports
