1122GACa; 1122CAFa McKenzie 2-Drawer Bench
Assembly Instructions
1122GACa_1122CAFa — Page 3 — 02/17
Tool Required: Phillips Screwdriver
1.
This unit was shipped with the seat placed into its recessed position but not attached with
screws. This allows for easy removal if you wish to customize the upholstery on your seat. To
reupholster the seat we suggest you seek professional advice.
2.
To attach your seat, remove the drawers, noting where each drawer came from to ensure
correct reinstallation. To remove the drawers, push up on the left Drawer Release Lever while
pushing down on the right Drawer Release Lever (see Figures 2a and 2b). Place the unit upside
down. Using the predrilled holes as guides, attach the Seat (B) with the six #8 x 1-1/4" Pan
Head screws (M) as shown in Figures 2 and 2c. Turn the unit upright and install the drawers.
M
x 6
Fig. 2
M
M
M
B
Drawer Release Lever
Fig. 2a
Fig. 2b
Fig. 2c
Fig. 1
B
