Page 3
TDI SL
Owner’s Manual
Assembly
1.
Remove all parts from the shipping carton and check assem-
bly diagram to ensure all parts are present.
2.
Install black rubber washers on fiber clevis/lower rod, insert
clevis lower rod onto loop ears. Use only nonmetallic wash-
ers, fiber bolt, and fiber thumb nut to secure loop/search coil
to clevis/lower fiber rod.
3.
Unlock “S” rod cam-lock and insert clevis/lower rod into
curved “S” rod so that stainless steel spring clip buttons line
up and lock into one of the adjustment holes in the curved
“S” rod. Turn cam-lock to secure. The second or third
adjustment holes are suitable for average sized adults.
4.
Wind the loop cable around the rod assembly, first revolu-
tion over the top of the rod, all the way to the top of the
curved “S” rod, about five revolutions. Use the black cable
retainers, one near the loop, and one near the top of the
curved “S” rod, to hold the loop cable in place. Plug the
cable into the jack on the front of the control box.
5.
Grip the instrument by the handle, with your arm in the
elbow cup with strap and sweep the loop/search coil over
Search coil
Lower rod
Arm cup
Battery door
Clevis
Rubber
washers (2),
fiber bolt
Cam lock
