background image

26

Warranty

Chapter 6 GMT Information

If within two years (24 months) from the original
date of purchase, your White's detector fails due to
defects in either material or workmanship, White's
will repair or replace at its option, all necessary
parts without charge for parts or labor.

Simply return the complete detector to the Dealer
where you purchased it, or to your nearest
Authorized Service Center. The unit must be
accompanied by a detailed explanation of the
symptoms of the failure. You must provide proof of
date-of-purchase before the unit is serviced.

This is a transferable manufacturer warranty, which
covers the instrument two years from the original
purchase date, regardless of the owner.

Items excluded from the warranty are non-
rechargeable batteries, accessories that are not
standard equipment, shipping / handling costs
outside the continental USA, Special Delivery costs
(Air Freight, Next Day, 2nd Day, Packaging
Services, etc.) and all shipping / handling costs
inside the continental USA 90 days after purchase.

White's registers your purchase only if the Sales
Registration Card is filled out and returned to the
factory address by your dealer, soon after original
purchase for the purpose of recording this
information, and keeping you up-to-date regarding
White's ongoing research & development.

The warranty does not cover damage caused by
accident, misuse, neglect, alterations,
modifications, unauthorized service, or prolonged
exposure to corrosive compounds, including salt.

Duration of any implied warranty (e.g.,
merchantability and fitness for a particular purpose)
shall not be longer than the stated warranty. Neither
the manufacturer or the retailer shall be liable for
any incidental or consequential damages. Some
states however, do not allow the limitation on the
length of implied warranties, or the exclusion of
incidental or consequential damages. Therefore, the
above limitations may not apply to you.

In addition, the stated warranty gives you specific
legal rights, and you may have other rights which
vary from state-to-state.

The foregoing is the only warranty provided by
White's as the manufacturer of your metal detector.
Any "extended warranty" period beyond two years,
which may be provided by a Dealer or other third
party on your detector, may be without White's
authority involvement and consent, and might not
be honored by White’s Electronics, Inc.

Summary of Contents for GMT































Reviews: