4
INSTALLATION, OPERATION & MAINTENANCE MANUAL 8194
WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
PARTS BREAKDOWN
6
8
4
1
3
A
5
2
7
1. Loosen locknut. DETAIL B
4. Tighten locknut to prevent any unauthorized
or accidental temperature adjustment.
3. Using 1/8” allen wrench turn adjustment stem
counter-clockwise for hotter or clockwise for
colder outlet temperature. DETAIL C
5. Re-check temperature.
2. Turn faucet on so water temperature can
stabilize.
1/8" ALLEN WRENCH
ADJUSTMENT
STEM
DETAIL C
DETAIL A
5/8" WRENCH
LOCKNUT
DETAIL B
TEMPERATURE ADJUSTMENT:
IMPORTANT:
Thermostatic Mixing Valve is factory pre-set at 77 F.
Verify requirements before altering temperature settings since they may
affect patient health and safety. Thoroughly test outlet water
temperature.
NOTES:
A Thermostatic Mixing Valve is FACTORY PRESET AT 77 F.
B For additional technical data, refer to Original Equipment Manufacturer model:
WATTS 009QT 1/2” BRONZE REDUCED PRESSURE ZONE, “RPZ” VALVE.
C For additional technical data, refer to Original Equipment Manufacturer model:
JAY R. SMITH MFG. CO. MODEL NO. 2694.
R
R
ITEM # PART NUMBER DESCRIPTION
1
CTA8194B-001 TEMPERATURE GAUGE
2
CTA81935-001 WALL FLANGE/ DOOR FRAME ASSEMBLY (INCLUDES LATCH)
3
7841-001-000
SUPPLY SHUT-OFF BALL VALVE
4
7802-137-001
ST70-12-77, THERMOSTATIC MIXING VALVE (SEE NOTE A)
5
1818-425-000
3/4" MALE HOSE CONNECTION
6
0540-019-000
BACKFLOW PREVENTER ASSEMBLY (SEE NOTE B)
7
0540-017-000
TRAP PRIMER (SEE NOTE C)
8
0571-003-000
RUBBER GROMMET
