Whitehall Manufacturing Little Splint Instructions For Operation And Care Download Page 7

Whitehall Manufacturing is a Division of Acorn Engineering Company

Whitehall Manufacturing Company warrants that its products are free from defects in material or workmanship under 
normal use and service for a period of one year from date of shipment. Whitehall's liability under this warranty shall be 
discharged solely by replacement or repair of defective material, provided Whitehall is notified in writing within one 
year from date of shipment, F.O.B. Industry, California.

This warranty does not cover installation or labor charges, and does not apply to materials which have been 
damaged by other causes such as mishandling or improper care or abnormal use.

 The repair or replacement of 

the defective materials shall constitute the sole remedy of the Buyer and the sole remedy of Whitehall under this 
warranty. Whitehall shall not be liable under any circumstances for incidental, consequential or direct charges caused 
by defects in the materials, or any delay in the repair or replacement thereof. This warranty is in lieu of all other 
warranties expressed or implied. Product maintenance instructions are issued with each fixture, and disregard or non-
compliance with these instructions will constitute an abnormal use condition and void the warranty. Stainless steel 
must  be  protected  on  jobsites  during  construction  and  must  be  properly  maintained  after  the  water  has  been 
introduced  into  the  fixture, or  Whitehall's  limited  warranty  is  void.  If you  have  any  questions  or  require  technical 
assistance, please call 800-743-8219.

NOTICE TO KEEP ORIGINAL PACKAGING-

 Regarding warranty claims: customer must retain original packaging 

for one year upon receipt of product. If packaging is discarded, it is the customer's responsibility to provide adequate 
packaging. Any shipping claims that are a direct result of customer-provided packaging materials will be handled by 
the shipper.

MANUFACTURER'S WARRANTY

Summary of Contents for Little Splint








Reviews: