Step I) Once the back of the armrests is
bolted in. Go back and secure the final two
2-
1/2” screws in each arm rest.
Step J) Secure the bottom brace (BB) with
(5)
1 ¼” screws.
Step K) Tip the chair over and secure the
state back and (BB) to the 7
th
board using (3)
1-
5/8”
Philips screws.
You may wish to use a clamp to hold the
back firmly to the board (see previous pic).
These are for leveling the chair to the level
surface and screwing the back to the seat.
One screw may not need to be as tight as
the other screws depending on how the
leg/seat boards sit.
