Using the Template & Adjusting the Stops
www.routeapocket.com
3
Figure 1b –
Caution, template shown above is not full scale
Choose the lower stop position by sliding the screw along the sloped line and align the
bottom side of the screw head with the lower stop position that provides the desired grip
length and penetration. In this example, the screw is aligned with 24B.
Confirm that the screw penetration does not exceed the width or thickness of the mating
workpiece and adjust if necessary. In this example, the screw will not break through a
mating workpiece that is at least 1” wide and 3/4” thick
Record the selected lower stop position. In this example, 24B is recorded.
