TROUBLESHOOTING
PROBLEM
CAUSE
REMEDY
Fan doesn’t work.
1.
No electricity.
2.
Blade stalled by housing.
1.
Check power Supply
2.
Call White Marquee
Piezo will no ignite.
1.
Ignition cable damaged.
2.
Ignition cable disconnected.
3.
Distance between electrode and
burner too large.
1.
Call White Marquee
2.
Call White Marquee
3.
Adjust distance within 3-8min
No gas.
1.
Gas cylinder is empty.
2.
Gas valve on cylinder closed.
3.
Gas valve of heater not open.
1.
Replace new gas cylinder.
2.
Open the valve.
3.
Attempt re-light sequence correctly.
Flame goes out while
heater is running.
1.
Thermo-element was not heated
enough.
2.
Safety thermostat activated.
3.
Restricted air flow.
1.
Repeat ignition process and keep safety gas valve
depressed for a minimum of 5 seconds, then release
slowly.
2.
Allow the heater to cool down for at least 10
minutes. Check thermostat and the attempt re-light
sequence correctly.
3.
Check heater inlet and outlet, remove any
obstructions.
SPECIFICATIONS
Rated voltage
220V-240V-50H
Rated output
80W
Heat output
70Mj/hr
Air flow
500m3/h
Gas consumption
1.42kg/h.
Weight (approx.)
8.5kg
Min gas cylinder size
15kg
Minimum volume of room
360m3
