5
CHANGING THE OPENING DIRECTION OF THE DOORS
It is recommended that changing the opening direction of the doors should be done with a helper.
You will need two spanners No. 8 and No. 10 and a Philips head screwdriver.
!
When changing the opening direction of the doors, YOU CAN NOT lay the refrigerator horizontally.
Do the actions below in the order they are listed:
WARNING!
Turn
off
the
appliance and pull the plug
out of the electricity supply
socket
.
1.
remove the bottom cover
15
;
2.
unscrew two screws
12
and
remove the bottom bracket
13
together with the washers
11
on
the axle and the spacer
10
;
3.
remove the bottom door
9
;
4.
unscrew the fixing screws
7
of
the middle bracket
6
;
5.
remove the middle bracket
6
together with washers on the axle
and the spacer
5
;
6.
remove the top door
4
;
7.
unscrew the axle
2
together
with the nut
1
and the washers
3
from the upper bracket and screw
all this set on the left side of the
door;
8.
displace the plug
21
the upper
door and the plug
19
from the
bottom door on the right side;
9.
take out the pins
20
from the
cabinet in the zone of the cross
element and displace the to the
right side;
10.
hang the upper door on the
axle
2
;
11.
prior to screwing the middle
bracket
6
with washers and
spacers on the left side of the
cabinet, insert the bracket axle
into the upper door;
12.
hang the bottom door on the
middle bracket axle;
13.
prior
to
unscrewing
the
bracket
16
and exchanging it with
the bottom bracket
13
(together with the set of washers and spacers), insert the bracket axle
into the bottom door. The brackets 14 which are under the brackets
13
and
16
remain in their
places;
14.
unscrew fixing screws
17
from doors, remove handles
18
and screw it on the eight side of the
door therefore taken out plugs. Cover the holes in which the handle was screwed with taken out
plugs. Put on the bottom cover
15
.
