background image

 

 
INSTALLATION 

Position the tumble dryer so that the plug remains accessible after installation. Do not block the vent at 
the front or base of the dryer, as this will impair the working of the machine. This appliance must not be 
installed behind a lockable door, a sliding door or a door with hinges on the opposite side to that of the 
tumble dryer. 
 

DRAINAGE OPTIONS 

Your new tumble dryer is fitted with an internal drain pump, which gives you the option of being able to 
drain condensed water to its water bottle, or to your household waste pipe. Connecting your dryer to a 
household waste pipe will mean you will not need to periodically empty the water bottle. As supplied, the 
drier will drain the water to its bottle. If you wish to convert the dryer so that its water is diverted to a 
household waste pipe, follow the simple instructions below:- 
1/ Pull the drain hose from the valve at the top of the unit. 
2/ Fit the drain hose into your household waste pipe, ensuring a gap between the end of the hose and any 
water in the waste pipe. 
 

 

 

 

 

FINAL INSTALLATION 

              

                                                                                  

 

The illustration shows the minimum space required by the dryer and the 
position of the waste-pipe within this space and behind the dryer. If a trap 
is fitted it must not obstruct the air inlet at the back of the dryer. The 
waste pipe can be positioned on either side of the dryer. 
If the waste pipe is used by the dryer and a washing machine then its 
diameter must be large enough to contain both hoses - 1.5" bore (38mm) 
minimum. 

Push the filter into its operating position as shown in 
the diagram. If you wish to change the side on which 
your door opens, see the instructions on the back 
page. Remove any dust by wiping the drum and door 
with a damp cloth. Any initial smell of burning will 
be caused by dust on the heater and will quickly 
disappear. 

To return your drier back to taking the condensed water to the water 
bottle, simply fit the drain hose back to the valve at the top of your 
drier. 
If the drain hose is not long enough to reach your waste pipe, a 
drain extension kit can obtained from your retailer (part number 
4213 089 8778). 

Summary of Contents for TUMBLE DRYERS









Reviews: