![White Knight DW1260IA Instruction Manual Download Page 30](http://html.mh-extra.com/html/white-knight/dw1260ia/dw1260ia_instruction-manual_975958030.webp)
The d ishes w ere not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ".
Use more detergent, or change your detergent.
Rearrange the items so that the spray can rotate freely.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray
Arms".
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The p rogramme w as
not powerful e nou gh.
N ot enoug h detergent
w as dispensed.
Items are blocking
the path of spray arms.
The fi lter combination
in the base of was h
cabin et is not clean or
is not correctly fitted.
This may cause
the spray arm jets
to get blocked .
C ombination of soft
w ater and too much
detergent.
A luminum utensils
have rubbed against
dishe s.
D ishes bl ock
detergent cup s.
Improper load ing
Too li ttle rinse -aid
D ishes are removed
too soon
Wrong progra m
has b een selected
U se of cu tlery with
a low-quality coating
Unsatis
-factory
washing
result
Unsatis
-factory
drying
result
Tap is not opened, or water intake is restricted,or water pressure
is too low.
Some ele ment of dishwas her leaks.
Longer inl et time .
O verf illed.
When some malfunctions come on, the appliance will display error codes to warn you:
If overflow occurs, turn off the main wat er supply before callin g a service .
If there is water in the base pan because of an overfill or small leak,
the water should be removed before res tarting the dishwashe r.
The 3in1 light flicker fleetly
The ECO light flicker fleetly
Summary of Contents for DW1260IA
Page 1: ...DW1260IA ...
Page 33: ...28 ...