1. The salt contai ner must only be refil led when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt w arning light in the con trol panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive sa lt.
Always use the salt intende d for u se with dishwasher.
The salt c ontain er is located ben eath the lower basket and sh ould b e fill ed a s e xplained
in t he foll owing :
Attention!
Only use salt spe cif ica lly desi gne d for t he use i n dishwa shers! Every other type of
salt not speci fically de sig ned fo r the u se in a d ishwas her, espe cially tab le salt, will
damage the w ater sof tener. I n case of da ma ges caused by the use of unsuitable
salt t he ma nuf act ure r doe s not give any wa rranty nor is liable for any damage s caused.
Only fil l wi th salt just b efore starting one o f th e co mp let e wa shing p ro grams.
This wi ll p reve nt any g rains of s alt or salty wate r, which ma y have b een spilled,
remain ing on the bottom of the machi ne for any pe rio d of time, which may cause
corrosi on.
The rinse aid is released d uring the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rins e aids. The rinse a id dispenser is located inside the door next to the detergent dispense r.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spo t and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any o ther substances
(e.g. Dishwasher cleaning agent, liquid detergent). Th is would damage the app liance.
A
Remove the lower basket and then unscrew and remove the cap from the salt container.
B
Pl ace the end of the funnel(supplied) into the hole and i ntro duce abo ut 1.5kg of d ishwash er salt.
C
Full fil l the salt container with water.It is normal for a small amount of water to come out of the salt container.
D
After fil ling the container , screw the cap tightly back clockwise.
E
Usually, the salt warning light will stop being illuminated within 2-6 days afte r the salt contain er ha s be en fi lled with
salt.
F
Immediately after filling the salt into the salt container, a washing program should be started
program
Otherwise the filter syst em, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.
(We su ggest to use the
soak or rapid
).
Summary of Contents for DW0945WA
Page 1: ...DW0945WA ...