WHITE KNIGHT WK372 Compact Air Vented Dryer Parts List
User Instruction Booklet
4213 094 5969A
To identify if your dryer has been built with a 4 rib belt and 4 groove pulley a prefix
of /20 and above can be found after the 12 digit code on the rating plate.
IMPORTANT - PLEASE NOTE: The 3 rib belt is NOT interchangeable with the 4
groove belt and vise versa.
From Mon 06th August 2007, All machines will be built using Mid White Plastic
and Painted parts, Also these machines are fiited with a clockwork timer (item 211)
This change also affects the timer knob (item 352)
To identify these machines /21 is added to the rating and serial plate
- All parts are in bold text.
Please Note: If you have a machine with serial No's 0743 849891
to 0743849960, these are the exception and have been built using
Euro White parts, check the serial No before ordering parts.
To identify If your dryer requires the three bearing set (Item
387a), /23 has been added to the rating plate.
Older dryers fitted with one rear bearing should NOT have
the three bearing set installed as the upper two recesses
on the back panel do not the have securing tabs.
** Please see attached Technical Bulletin 26 which refers to a change to the heater wire routing/heater wire
lengths on the Back Panel (item 389) and the reshaping of the Rear Banjo Cover Assembly (item 391). For
machines built prior to June 24th 2003 (serial numbers listed on Bulletin), if either item 389 or 391 needs to be
replaced, then the other should also be replaced at the same time. The part number listed (4213 092 40451) is
for a kit containing both parts.
From week 44, 2001, a new timer has been introduced (item 211). Because the loom
has been altered to accommodate this new timer, it will not fit onto older dryers.
Additional Items Not Shown On Exploded Views
Items 226, 227 and the Wiring Loom are now no longer available as spares. If these
parts are genuinely required for a repair, we will only supply them on receipt of the
exact serial number of the dryer concerned.
When ordering items 142, 226a, 228 or 389, please check the serial number prefix to
establish the week of manufacture and therefore the correct part number or,
alternatively, use exploded views 2/1 & 2/2 to visually identify which heater the dryer
has been fitted with.
When ordering drum assembly 266, please check the serial number prefix before
selecting the correct part number. The drum design was not altered with respect to
the new heater, but as part of a previous modification to the earthing assembly.
Mismatching the wrong drum with the wrong earthing arrangement may create a risk
of electric shock. If in doubt, please refer to exploded view 3 which explains how to
visually identify one drum from the other.
PLEASE NOTE: Bold text indicates choice of different parts depending on the model.
WK372
