background image

7

Hinweis: Stand der techn. Angaben.

Techn. Änderungen vorbehalten.

Maintenance and Care

•  Always pull out the plug before cleaning the app-

liance.

•  After use, wipe the spin drum dry with a cloth.
•  If dirty washing has been spun, it is necessary 

to rinse the drum out with clear water in order to 

avoid soiling the next load of washing.

•  Clean the exterior of the spin dryer with a damp 

cloth and wipe it dry.

•  Use standard detergents only to clean the appliance.
•  Do not use abrasive cleaning agents.
•  Never use petrol or other solvent liquids.
•  The spin dryer requires no other maintenance.

Customer Service

If the spin dryer was purchased and is used in the 

UK and you require a service call, please contact 

the service agent named on the warranty card. 

Our customer service department can be contac-

ted at:
Crosslee plc, Hipperholme, Halifax, HX3 8DE. 

Telephone 01422 203963, or by emailing custo-

mer service at: [email protected]

 If unexpected difficulties arise

•  Before contacting your dealer, check whether the 

fault is due to one of the following minor causes.

The motor does not function:
• 

Has the fuse blown?

•  Is there damage to the mains cable, plug or  

socket? Pull out the plug before checking!

•  Never open the motor yourself!

Water does not flow out:

•  Pull out the plug! Check whether the outlet spout 

is blocked by a piece of washing.

•  Press the spin drum from the inside against the 

outer casing with your hand and remove the 

piece of washing.

The spin dryer does not pick up spin 

speed:

•  Please note that the spin dryer normally over-

comes a certain amount of unbalance itself when 

picking up spin speed. The motor and spin drum 

are suspended flexibly for that reason.

•  However, if the unbalance is too great (brought 

about by incorrect loading of the spin dryer), the 

machine cannot pick up spin speed.

The spin dryer “jumps”:

1. Switch off the spin dryer immediately!
2. When the drum has come to a standstill, repack 

the washing evenly.

3. Reload the spin dryer in accordance with the 

instructions given on the previous page.

Model

28007 T

Power:

Voltage
Fuse
Power input

[V]
[A]
[W]

230

13

350

Performance:

Max. load (dry weight)
Spin speed
Residual water

[kg]
[U/min]
[%]

3,7

2800

40

 Disposing of the Unit

This appliance is marked according to the European directive 

2002/96/EC on Waste Electrical and Electronic Equipment 

(WEEE).
By ensuring this product is disposed of correctly, you will help 

prevent potential negative consequences for the environment 

and human health, which could otherwise be caused by inap-

propriate waste handling of this product.

The symbol on the product, or on the documents 

accompanying the product, indicates that this 

appliance may not be treated as household 

waste. Instead it shall be handed over to the 

applicable collection point for the recycling of 

electrical and electronic equipment.
Disposal must be carried out in accordance with local environ-

mental regulations for waste disposal.

Summary of Contents for 28007 T









Reviews: