NOTE:
Pitch your tent on a clear ground, remove debris, rocks or sticks where you plan to set up your
canvas wall tent. The adjustment pins on poles and angle kits are color coded as golden and
silver to simplify the setting up process. (Refer to Image 2)
The roof poles which are inflated or deflated and the side & middle ridge poles are used to
make the roof frame structure. The measurement of the poles is given below for easy
identification, all you need is a measuring tape. The foot poles have a base plate with buckle
clip lock system at the end so it’s easy recognizable.
Step # 1: Unpack the tent and poles bags
TIP: Lay every component out before assembling, this will make the pitching process fast and
easy.
Take the tent cover, poles and angle kits out from their waterproof bags.Lay out all the key
components on the ground and sort out all frame pieces i.e. poles and angle kits. Determine
canvas tent orientation (direction of entrance you prefer) and position angle kits & tent frame on
floor in appropriate location for set up. Layout the pieces in progression in which they will be
assembled. Keep this manual in front of you while taking out all the tent items from the box.
Step # 2: Assemble the tent frame:
Assemble the middle ridge poles forming one long piece with the help of 3-way and 4-way
golden colored angle kits.
Place the roof poles in angle kits to complete the frame
Then, attach side ridge poles one by one along with silver colored angle kits
Look down the frame to make sure all the Side Ridge, Middle Ridge and Roof poles are in line
and properly positioned in the angle kits as per their color codes (golden and silver). In the
end, attach the steel wire on top front part of tent frame on side (silver) and middle (golden)
angle kits.
