S T E A M I R O N I N G
S T E A M I R O N I N G
• Set the temperature control (1) to position 2 or 3 or MAX for moderate steam or maximum
steam.
• If a too low temperature has been selected, water may leak from the soleplate.
• Ensure that there is enough water in the water tank.
• Stand the iron on its heel.
• Insert the mains plug into the wall socket.
• Wait for the thermostat light indicator goes off.
• Set the variable steam button (5) to adjust the steam :
« 0 »
Dry ironing (without steam)
« MAX » Maximum steam flow
S U P E R S T E A M
S U P E R S T E A M
• Ensure that there is enough water in the water tank.
• By pressing button (4) an intense jet of steam is emitted from the soleplate.
• To prevent water leaking from the soleplate, do not keep the steam control button
depressed for more than 5 seconds.
S P R A
S P R A
Y S E T T I N G
Y S E T T I N G
• Ensure that there is enough water in the water tank.
• The laundry can be damped down by pressing the spray button a couple of times (3), at any
temperature.
12
Notice DB 709_electro ouvert 21/12/05 11:55 Page 12
