15
Temp key (9)
- When appliance is operating, press the temperature key (9) to display the operating tempe-
rature. The preset temperature is 120 °C.
- The temperature light indicator is lighting on (14).
- To set the required temperature, press – and + keys (11).
- The temperature range is adjustable from 60 to 240 °C, 20°C per 20 °C. The temperature
adjustable up to 240 °C. It is suitable to grill or fry.
Timer key (10)
- When appliance is operating, set the desired temperature or power stage.
- To preset a cooking time, press the timer key (10). The timer light indicator is lighting, the
window is displaying 0.
- If no key is pressed within 5 seconds, the window turns back to temperature displaying
- To set the cooking time, press + key. Each touch is adding 5 minutes. The – key is removing
1 minute. For example, to preset 18 minutes cooking, press 4 times the + key (=20 min), then
press 2 times the – key (=18 min).
- Once the time is selected, after 5 seconds without pressing any key, time is registered. The
display turns back to temperature.
- Using the timer mode, temperature or power stage are adjustable using – and + keys.
- The registered cooking time is adjustable : press again the timer key (10). The display is
showing the remaining cooking time. Use – and + keys to modify it.
- Once the cooking time is passed, the appliance shuts off automatically.
- Operating range or selected time can be cancelled by pressing O/I key (7).
C L E A N I N G
C L E A N I N G
• Unplug and let the appliance cool completely before cleaning.
• Wipe the control panel and the ceramic panel with a special ceramic product. Follow the
instructions of product.
• Dry thoroughly.
• Wipe the housing with a dry cloth.
• Regularly remove dust from the air entries using a vacuum cleaner.
• Do not clean any part of the unit with abrasive cleaners e.g. souring powders, scouring
pads, wire wool, washing soda or bleach.
• Do not immerse any part of the appliance.
• Do not put in dishwasher.
• Check the plug from damages.
PROBLEM
The O/I indicator does not light.
The O/I light indicator is on, but heating
does not start.
Heating stops suddenly during operation.
Code of failure
E01 or E02
Electronic control
of voltage
E:05 or E:07
Overheating
protection
E:03, E:06, or E08
short circuit
or temperature
sensor malfunction
POSSIBLE CAUSE
Check the plug is tightly inserted.
Check the switch, socket, fuse and power
cord are in good condition.
Check the high voltage circuit board and
the display board for damage.
Check the pot material is convenient.
Whether the ambiant temperature is too
high.
Whether the air entry or the air vent is
blocked.
Whether the selected time is passed.
Low or excess voltage. Make sure the
appliance is connected to the voltage indi-
cated on the rating label.
Eliminate the course of overheating.
Once the cooktop has cooled, the applian-
ce can be but into operation again.
Please contact the special maintenance
department.
16
T R O U B L E S H O O T I N G G U I D E
T R O U B L E S H O O T I N G G U I D E
