WA
15S
Operation Manual rev 1.0.0
13. Technical Specifications
9
13. Technical Specifications
Following are the WA Series technical specifications. These figures are accurate at the
time of printing but please note that all figures are subject to change without notice.
Model
System Type
Frequency Response (-3 dB)
1)
Frequency Range (-10 dB)
1)
System Sensitivity (1 W @ 1 m)
2)
Power Handling
Recommended Amplifier Power
Rated Maximum SPL
2)
Nominal Impedance
Driver Complement
Active Crossover (external)
Construction
Enclosure
Finish
Connectors
Fittings
Dimensions
Weight
Note 1):
Average over stated bandwidth. Measured at 1 metre on axis.
Note 2):
Unweighted pink noise input, measured at 1 metre in half-space.
All specifications are subject to change without notice.
WA 15S
Bass direct radiating loudspeaker - Vented
54 Hz - 3000 Hz
45 Hz - 4000 Hz
100 dB (1 W = 2.83 V for 8 ohms)
1000 W (average), 2000 W (programme), 4000 W (peak)
1200-2000 W @ 8 ohms
130 dB (average) 136 dB (peak)
8 ohms
1 x 380 mm (15”) Bass driver
Low Pass fi lter 100 Hz - 500 Hz, 24 dB/octave
Recommended Hi Pass filter 45 Hz, 24 dB/octave
71.2 litre vented, 18 mm (0.71”) birch plywood.
Vented and internally braced
Textured black paint.
Powder coated perforated steel grille
2 x speakON NL4MP in/out
2 x integrated carrying handles.
Blanking plate allows installation of a 35 mm pole-mounting socket.
8 x M10 bracket inserts allowing for landscape or portrait mounting
1 x M10 insert for pull-back
W: 480 mm (18.9”), H: 590 mm (23.23”), D: 420 mm (16.54”)
TBA
