20
TROUBLESHOOTING / SPECIFICATIONS
Red LED On
Problem
Solution
Equipment has a high start up surge.
Turn inverter power switch center OFF
(O) and then Inv+USB (l) again until the
inverter powers your appliance. Repeat
as necessary to get your appliance
“started”.
Battery voltage below 10 volts.
Recharge or replace battery.
Inverter is too hot (thermal shutdown
mode).
Allow inverter to cool. Check for
adequate ventilation. Reduce the load
on the inverter to load on the inverter
to output.
XP600i WATT INVERTER SPECIFICATIONS
Maximum Continuous Power .................................... 600 Watts
Maximum Surge (Peak Power) .............................. 1200 Watts*
No Load Current Draw ............................................... <0.6 A
Waveform ................................................. Modified Sine Wave
Input Voltage .............................................. 11 – 15.5 +/- .5V
AC Receptacle ......................................... Six North American
Fuses ................................... (3) 35 Amp (Spade Type-Internal)
USB ..................................................................... 5V 2.1A Max
Approximate Dimensions ........... 7.56” L x 5.04” W x 2.75” H
Approximate Weight ................................................... 2.15 lbs
*Under certain conditions your inverter may provide up to 2 times
the continuous rating for a brief period.
