OPERATION
20
X/K Filter Modes
Recently, many new products operate on X or K band
causing nuisance alerts to radar detectors. Some of these
are radar based Traffic Monitoring Systems mounted to
poles alongside the highway and others are K Band Lane
Change Assistants and Blind Spot Detectors found on some
automobiles. The X/K Filter Mode offers multiple levels of
rejection to reduce false alerts caused by these systems.
Ka Filter Modes
There are times when a radar detector in another vehicle,
can emit a frequency which can cause your detector to falsely
alert. The Ka Filter Modes allow you to select the level
needed for your area to minimize the occurrences of these
false alerts.
Filter Mode is the factory default setting and should provide
adequate filtering for most conditions. If you experience
excessive alerts due to radar detectors in other vehicles,
increase the Filter level. See Option Selection Mode to
change the filter settings.
Setting Saver
Setting Saver saves your personalized settings so that when
the detector is turned off and then on again, you do not have
to re-enter them.