8
Windshield Mounting
•
Install the two suction cups and rubber bumper onto the bracket
by fitting them into their holes.
•
Press the suction cups onto the windshield at the location you
have chosen.
IMPORTANT: Some newer cars have a plastic safety coating on the
inside of the windshield. The windshield bracket may leave permanent
marks on this type of surface. To find out if your vehicle has this type
of windshield, check the vehicle’s owner’s manual or ask your dealer.
We recommend that you do not leave the suction cup bracket on the
window in direct sunlight. If the detector is removed, this may cause
blistering of the dash in some vehicles.
•
Slide the detector onto the bracket until it locks into place.
•
If necessary, the unit may be leveled by bending the windshield
bracket. Press the bracket release button and remove the
detector before bending.
Rubber
Bumper
INSTALLATION
