OPERATION
10
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode when selected automatically
shuts off the detector after 3 hours. The timer is reset if the
detector is turned off, unplugged or any button is pressed
before the timer has expired. The detector will alert you with
an audible and visual warning before it shuts off. During this
warning, you can momentarily reset the timer by pressing any
button. If the unit has automatically turned off, press the Power
button to turn the unit back on. Refer to “Option Select Mode”
for changing the battery saver mode options.
Red Light/Speed Camera Detection
This unit is capable of alerting to these locations with the
updatable database.
Getting a Satellite Lock
Powering up, the unit will begin its search for satellites. During
this time, the unit will flash the satellite icon on the display.
Please allow several minutes for the unit to lock onto the
satellites. This delay is normal when the unit is turned on at least
500 miles from when the unit last received a satellite lock or if
several days have passed since its last usage.
NOTE:
Driving while initially searching for satellites will take
longer than if you are stationary. Acquiring satellites takes much
longer the first time.
Camera Alerts
When approaching a known camera, the unit will provide the
type of alert (Red Light Camera, Traffic Camera, Speed Camera,
or User Location). Example: the display will show
TRF CAM
then
count down the distance to the camera. Once past the camera
location, the unit will provide a beep-beep audio tone and the
word PASS will be shown on the display.
Manual Entry
(Waypoint)
The unit will save a special location (i.e., a new red light camera
or even a “trap”) if you enter it manually. The unit will store 1000
user locations.
NOTE:
Manual entries must be approximately
330 feet apart to prevent overlapping locations. To manually
enter a location, press and release the FUNCTION button
(see Option Select Mode) and the unit will beep to confirm.
Manual entries can be deleted within a certain radius (selected
in Option Select Mode). Once a radius is selected the data can
be deleted within the selected Radius or they all can be deleted
completely from memory.
