background image

OPERATION

OPERATION

19

• Press and release the       (Quiet/Record) button to begin
a recording. Note: Recording starts as soon as the button
is released. Display reads:

REC = record, 1 = track #, 8 = time remaining

If the recording time expires for a track, the unit will auto-
matically switch to the next track. Press and release 

(Quiet/Record) again to stop recording. The unit will

automatically stop recording once track 9 is completed.

To play a message:
• Enter Memo mode and press      (Power/Play) to listen to
recorded messages.
• To play a selected track, press  (Volume Up) or 

(Volume Down) button until selected track appears on

the display. Display reads:

PLY = play, 1 = track #, 8 = time remaining

• Press the     (Power/Play) button.
Messages are kept in memory and are not affected by
resetting the factory features. See “Reset Features” sec-
tion of the manual.

To delete a message:
• Enter Memo mode and press   (Volume Up) or 

(Volume Down) button until selected track appears on

the display.
• Press the     (Quiet/Record) button twice.

REC1  8

PLY1  8

18

To exit Memo mode:
• Press memo button and release. The unit will beep twice.

NOTE:

Memo mode automatically exits within 20 seconds

if a button is not pressed.

Vehicle Battery Saver Mode

The Vehicle Battery Saver Mode automatically shuts off
your detector within 3 hours if you forget to turn it off. The
timer is reset if the detector is turned off, unplugged or
any button is pressed before the 3 hours have expired. The
detector will alert you with an audible and visual warning
before it shuts off. Display reads:

During this warning you can momentarily reset the unit by
pressing any button. This will reset the timer.

If the unit has automatically turned itself off, press the 

(Power/Play) button to turn the unit back on.  You can

manually engage the Vehicle Battery Saver Mode by press-
ing and holding the City button until one beep is heard.

Refer to “Option Select Mode” for instructions for deacti-
vating battery saver mode feature.

Vehicle Battery Monitor

The vehicle’s battery voltage can be momentarily dis-
played by pressing and holding the Mode button for 3 sec-
onds. Display reads:

12.8 V

Summary of Contents for 1783 SE




















Reviews: