4 WhisperPower Touch Display
WP 5.0, 7.0 and 10.0 inch
1. Introduction
Congratulations on your purchase of the WhisperPower Touch Display, displaying WPC in-
verter/ battery charger information, precise battery monitoring and/or WhisperPower Genera-
tor information. The WhisperPower Touch Display is available in 3 sizes: a 5 inch WP 5.0 Touch
(order number 40280100), the 7 inch WP 7.0 Touch (order number 40280101). WhisperPower
has designed and built this Touch Display to the highest standards for years of dependable
and accurate service. Inside the Touch panel, a WPCI 2000 interface has been integrated.
This WhisperPower Touch Display
will only operate with a RS232-i interface (order number
60201084)
which is connected to a WPC WhisperPower Centre inverter/charger, or con-
nected to a DDC connection of a WhisperPower Generator. Please read this manual carefully
and follow these instructions for installation, configuration, and usage of the WhisperPower
Touch panel in order to ensure optimal performance.
Functionallity:
1.2 Firmware Revision
This manual corresponds to ycXXarm firmware revision 1.0.
1.3 WPCI2000 Features (WhisperPower Touch display)
The WhisperPower Touch 5.0 and Touch 7.0 have the following features.
•
Showing of WPC inverter/ battery charger information
•
Showing of key Generator information
•
Setting of WPC (On/Off/Charge only and Current limit) by user
•
Setting of Generator (Start/Stop) by user
•
Setting of WPC parameters by qualified installer
•
Setting of BSP parameters by qualified installer
•
Setting of Generator parameters by qualified installer
PART NUMBER DESCRIPTON
WPC
SQ SERIE
SC SERIE
GV SERIE
40280100
TOUCH PANEL 5”
Full
Limited functionality, no Voltage,
Current and frequency setting. Only in
combination with WPC
40280101
TOUCH PANEL 7”
Full
